|
| Pavement |
|
ARCTIS |
The ARCTIS, working along with the BOSO III sensor, cools itself by up to 27ºF below the road surface and displays the actual freeze point via the BORRMA software, regardless of chemical on the roadway, eliminating the need for chemical algorithms and look up tables.
|
|
BOPAS |
The BOPAS sensor used in combination with an RWIS allows the measuring and condition of the pavement status as well as pavement temperature (dry, wet, salted, black ice, frost).
|
|
BOSO III |
| The BOSO III system uses an active/ passive sensor design. The passive element measures pavement temperature, road wet/dry and water film thickness. The active element cools itself by 3.6ºF below road surface temperature to determine a freeze point, alerting the user, via the BORRMA software, to a possible icy condition. This sensor also is capable of spraying a Boschung FAST or micro-FAST system. |
|
| These sensors determine current and future surface temperatures, are self-contained, flush mounted to the road surface, and built to withstand the harshest winter conditions and pavement surfaces. |
|
| Atmospheric |
|
Windspeed and Wind Direction |
- High Precision Sensor
- Light Construction
- Analague outputs for easy interface with all kinds of electronics
- Seperated Construction of both sensors for easy maintenance
- Conformity to CE norm
- Integrated heating for accurate operation in extreme conditions
|
|
Optical Precipitation Sensor |
- Detection of rain and/or snow at 3 levels of intensity
- Optical measuring process, with years of proven accuracy
- Automatic Contamination detection (Dirty Probe Detection)
- Integrated ambient temperature measurement
|
|
Air Temperature and Humidity |
- Combined measurement of Humidity and Air Temperature
- Measurement of relative humidity by capacitive principle
- Measurement of Air Temperature using PT100 1/3 Din Sensor
|
|
Subsurface Sensor |
The subsurface sensor measures the pavement sub-base or subsoil temperature. The model TU sensor is buried horizontally or vertically below the surface of the roadway, according to the measuring depth required. The measuring element NI 100 or PT 100 is mounted on a metallic mass, the whole assembly being cast in a block of resin inside a metal cylinder. |
| |
Barometer |
- Accurate and Reliable Analog Measurements
- Direct Reading
- Potentiometeric Output Signal
- Preset feature for improved accuracy
- Waterproof case for fram installation
- No Power Supply
|
|
Pyranometer - Global Solar Radiation Sensor |
- Low Dome Thermal Offset Error
- Good cosine/directional respose
- Excellent long term stability of sensitivity
- Good linearity performance
- Completely waterproofed housing
|
|
Snow Depth Guage - SHM 100 |
- High accuaracy
- Automatic snow depth measurement
- Exact measurement of all types of snow
- Connect with a Measuring Station or function as a stand alone sesor
|
|
Fog and Frost Detection System - THYGAN EK33 |
- Detects fog by means of a precise water vapor measurement
- Thermo hygrometric, non-optical, measurement method
- Integrated air temperature sensor
- Maintenance-free operation
- No measurable ageing
- No problems with dirt
- The highly accurate and reliable humidity values improve black-ice early warning (danger of slippery front on cold road surface)
- 10 day data memory with adjustable increments
|
|
Bofog |
- High accuracy
- Proven optical technology
- Digital, analog switch outputs
- Selectable alarm thresholds
- Easy installation and maintenance (U-Bolt mounting for simple installation)
- Corrosion resistant
- Low power consumption and available in VDC or 110/230 VAC power supply
|
|
The combination of active/passive sensors increases the overall accuracy in predicting black ice, ice, and frost formation by utilizing multiple location detections and different measurement techniques.
Used in combination with Boschung America's RWIS, this sensor technology provides accurate surface monitoring and condition prediction capabilities. |
